This eMMC Firmware is tested and verified by our TEAM, You need to write this Firmware File to Clean RPMB or to Repair a Dead eMMC.
Below are the Main Errors come for which you have to write this eMMC Firware file to Repair Samsung eMMC.
Warning: Health report is very BAD Device Life Time Estimation (MLC) [269]: 0x0B Exceeded its maximum estimated device life time Device Life Time Estimation (SLC) [268]: 0x01 0% - 10% device life time used Pre EOL information [267]: 0x03 Urgent
Generally, UFI Box, Mipi Tester and some other eMMC Flasher Software required eMMC firmware in .ffu Format and Some eMMC Flasher Software like Easy JTAG and other need the File in .bin Format. Therefore we are giving both Format Files in this zip package.
This File Can be flash through any eMMC Flasher like UFI BOX, Easy JTAG, MIPI Tester etc.
Follow these steps to Flash / Update eMMC Firmware File:
- Download and Extract: Begin by downloading the eMMC Firmware and extracting its contents on your computer. Ensure that you have a reliable source for the file to guarantee its authenticity.
- Open EMMC Flasher Tool: Launch your preferred EMMC Flasher Tool, such as Easy Jtag Plus, UFI BOX, MIPI Tester, or any other compatible tool you have at your disposal.
- Connect eMMC : Establish a secure connection between your computer and the eMMC. Make sure the connection is stable and the device is recognized by the flasher tool.
- Identify/Check eMMC: Once the chip is connected, use the flasher tool to click on the “Identify” or “Check eMMC” option. This step ensures that the tool recognizes the connected eMMC and establishes communication with it.
- Update eMMC Firmware: Now Click “update eMMC FW” tab, you can find this under the Advanced Section if you are using Easy JTAG Box.
- Locate eMMC Firmware: Navigate to the location where you extracted the eMMC Firmware. Ensure that you select the correct file corresponding to the device and issue you are addressing.
- Monitor Progress: Keep a close eye on the flashing process. The tool should provide real-time feedback on the progress, and you may see a percentage completion or a progress bar.
- Completion and Verification: Once the flashing process is complete, verify that the operation was successful.
Reviews
Clear filtersThere are no reviews yet.