Moto Edge 20 XT2143-1 BlankFlash file
Motorola Moto Edge 20 XT2143-1 BlankFlash File Download Original price was: ₹500.00.Current price is: ₹200.00.
Back to products

Samsung A022G U2 A022GDXU2AUF1 10 Dead Boot Repair Scatter Firmware

SKU: Samsung S22 Ultra 5G s908 dump-1

Apple Shopping Event

Hurry and get discounts on all Apple devices up to 20%

Sale_coupon_15

Original price was: ₹500.00.Current price is: ₹150.00.

₹ INR
  • $ USD
  • ₹ INR
11 People watching this product now!

Payment Methods:

Description

MediaTek (MTK) CPUs are commonly found in many Android devices. Flashing a scatter flash file using a MediaTek CPU involves a few steps. Here’s a general guide: Samsung A022G U2 A022GDXU2AUF1 10 Dead Boot Repair

  1. Preparation:
    • Download and install the appropriate USB drivers for your device on your computer.
    • Ensure your device has sufficient battery charge to avoid interruption during the flashing process.
    • Backup all important data on your device as flashing will erase everything.
  2. Download Required Tools:
    • Download SP Flash Tool (SmartPhone Flash Tool) and the specific scatter flash file (firmware) for your device model from a reliable source.
  3. Extract Files:
    • Extract the SP Flash Tool and the scatter flash file to a convenient location on your computer.
  4. Launch SP Flash Tool:
    • Open the SP Flash Tool folder and run the “flash_tool.exe” file.
  5. Load Scatter File:
    • In SP Flash Tool, click on “Scatter-loading” and navigate to the location where you extracted the scatter flash file. Select the scatter file (usually ends with .txt extension) and click “Open”.
  6. Prepare Device:
    • Power off your device completely.
  7. Connect Device:
    • Connect your device to the computer via USB cable while holding down the appropriate key combination (usually Volume Down or Volume Up) to enter into the device’s bootloader or fastboot mode.
  8. Flash Firmware:
    • Once the device is connected and recognized by SP Flash Tool, click on the “Download” button in SP Flash Tool.
    • The flashing process will begin. Wait for it to complete. Do not disconnect your device during this process.
  9. Completion:
    • Once the flashing process is complete, you’ll see a green circle in SP Flash Tool indicating successful flashing.
    • You can now disconnect your device and reboot it.
  10. Post-Flash Setup:
  • After rebooting, your device might take longer than usual to boot up as it configures the newly flashed firmware.
  • Set up your device as you would with a new phone, including language, Wi-Fi, Google account, etc.
  1. Troubleshooting:
  • If the flashing process fails or your device gets stuck in a boot loop, try repeating the process with a different USB cable, USB port, or computer. Also, ensure you have selected the correct scatter file for your device model.

Always exercise caution when flashing firmware, as improper flashing can lead to device malfunction or even permanent damage. Make sure to follow instructions carefully and double-check everything before proceeding.

Specification

Overview

Processor

Display

RAM

Storage

Video Card

Connectivity

Features

Battery

General

Customer Reviews

0 reviews
0
0
0
0
0

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.